Skip to product information
A handheld iron that steams as well as it presses
The ST588 does the two jobs a steamer alone cannot: it presses a flat collar and it steams a hanging dress. A 90 ° rotating handle lets you switch between the two without putting the unit down, and the ceramic soleplate runs at a fixed 160 °C so there is no temperature dial to get wrong.
What it does well
- Five settings, one fixed temperature. Position 1 is dry ironing; positions 2–5 add steam in steps from 9.5 to 19.2 g/min. Heat stays constant, so delicate fabric is protected by steam volume rather than by guesswork.
- Pressured steam without the spitting. The 140 ml tank is sealed and pressurised, which keeps output steady and stops water droplets marking the cloth.
- A soleplate shaped for the awkward parts. 130 × 77 mm ceramic-coated plate with seven steam holes and a narrowed tip for collars, cuffs and button rows.
Specifications
| Power | 1200 W |
|---|---|
| Settings | 5 — 1 dry iron, 4 steam levels |
| Steam output | 9.5 – 19.2 g/min |
| Heat-up time | About 20 seconds |
| Soleplate | Ceramic-coated, 130 × 77 mm, 7 steam holes |
| Soleplate temperature | Fixed at approx. 160 °C |
| Water tank | 140 ml |
| Cord length | 1.8 m |
| Dimensions | 257 × 72 × 123 mm |
| Weight | 0.85 kg |
| In the box | Heat-resistant rest base, water measuring cup, user manual |
Fabrics and care
- Suitable for linen, cotton, wool, fleece, polyester, nylon, silk and satin. On silk, cashmere and down, place a cloth between the soleplate and the garment.
- Use tap water. Do not add perfume, starch or descaling agents to the tank.
- Empty the tank after each use and let the unit cool on its rest base before storing.
- If steam weakens, run a 50/50 white vinegar and water mix through the tank, then flush with clean water.