Steam cleaners turn tap water into steam, which means minerals in hard water slowly build up inside the boiler. The symptom is easy to spot: the steam gets weaker, the unit takes longer to heat, and the first burst sputters. Descaling takes about ten minutes and is the single most useful thing you can do for the machine.
What you need
- White vinegar or a citric-acid descaler
- Clean water for rinsing
- A cloth and a bowl
Step by step
- Unplug the unit and let it cool completely. Never open a pressurised boiler.
- Mix one part white vinegar with two parts water, or follow the descaler label.
- Pour the solution into the tank and let it sit for 30 minutes.
- Empty the tank, refill with clean water, and run the steam for a minute to flush the system.
- Repeat the rinse once more, then empty and dry the tank before storing.
How often
Once a month in hard-water areas, once every two to three months with soft water. If you steam every day, descale more often — the mineral load matters more than the calendar.
Keeping it clean between descales
Empty the tank after every use instead of leaving water sitting in it. Stored water is where odour and scale start. A dry tank and an open cap are the simplest habits to keep.